紅外無線耳機放大器電路-Infrared cordless
紅外無線耳機放大器電路-Infrared cordless Headphone Amplifier
Using this low cost Project one can reproduce AUDIO from TV without disturbing anyone. It does not use any wire between TV and HEADPHONE. In place of pair of wires it uses invisible Infrared light to transmit audio signals from TV to Headphone. Without using any lens a range of up to 6 meters is possible. Range can be extended by using Lenses and Reflectors with IR sensors comprising transmitters and receivers. IR transmitter uses two-stage transistor amplifier to drive two IR leds connected in series. An audio output transformer is used (in reverse) to couple Audio output from TV to the IR transmitter. Transistors (BC547) & (BD140) amplify the audio signals received from TV through audio transformer low impedance output windings (lower gauge or thicker wire) are used for connection to TV side while high impedance are connected to the IR transmitter. This IR transmitter can be powered by 9v mains Adaptor or 9v Battery. Led in transmitter circuit functions as power-on indicator. IR receiver uses 3-stage transistors amplifier. The first two transistors (BC549c)from audio signal amplifier. While the third transistor(BD139)is used to drive a headphone. Adjust potmetre for max clarity. Direct photo transistor towards the IR Leds of transmitter for max range. A 9v Battery can be used to receiver circuit for portable operation.
非常好我支持^.^
(0) 0%
不好我反對
(0) 0%
相關閱讀：
- [功放技術] MAX97220 DirectDrive線路驅動器/耳機放大器 2011-03-22
- [音響技術] MAX97200 H類DirectDrive耳機放大器 2011-03-18
- [新品快訊] 首款集成G類耳機放大器模擬子系統PowerWise LM492 2011-02-25
- [新品快訊] TI推出集成型低功耗G類耳機放大器 2011-01-29
- [功率放大器電路圖] 鍵控音量耳機放大器電路圖 2010-12-25
- [功率放大器電路圖] 耳機放大專用集成功放LM4880 2010-12-22
- [音頻電路] 耳機放大器電路原理圖 2010-12-17
- [音頻電路] 聲科S-9001B型VCD機閑置的話筒前置放大器改裝耳機 2010-11-27
( 發表人：發燒友 )