具有三態(tài)輸出的增強型產(chǎn)品單路 2V 至 5.5V 緩沖器
| Technology Family | AHC |
| Supply voltage (Min) (V) | 2 |
| Supply voltage (Max) (V) | 5.5 |
| Number of channels (#) | 1 |
| IOL (Max) (mA) | 50 |
| ICC (Max) (uA) | 10 |
| IOH (Max) (mA) | -50 |
| Input type | Standard CMOS |
| Output type | 3-State |
| Features | Balanced outputs, Very high speed (tpd 5-10ns), Over-voltage tolerant inputs |
| Rating | HiRel Enhanced Product |
- Operating Range of 2 V to 5.5 V
- Max tpd of 6 ns at 5 V
- Low Power Consumption, 10-μA Max ICC
- ±8-mA Output Drive at 5 V
- Latch-Up Performance Exceeds 250 mA Per JESD 17
SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
- Controlled Baseline
- One Assembly and Test Site
- One Fabrication Site
- Available in Military (–55°C to 125°C)
Temperature Range - Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
The SN74AHC1G126 is a single bus buffer gate and line driver with 3-state output. The output is disabled when the output-enable (OE) input is low. When OE is high, true data is passed from the A input to the Y output.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
