具有三態輸出的 4 通道、2V 至 5.5V 緩沖器
| Technology Family | LV-A |
| Supply voltage (Min) (V) | 2 |
| Supply voltage (Max) (V) | 5.5 |
| Number of channels (#) | 4 |
| IOL (Max) (mA) | 16 |
| ICC (Max) (uA) | 20 |
| IOH (Max) (mA) | -16 |
| Input type | Standard CMOS |
| Output type | 3-State |
| Features | Balanced outputs, Very high speed (tpd 5-10ns), Partial power down (Ioff), Over-voltage tolerant inputs |
| Rating | Catalog |
- 2-V to 5.5-V VCC Operation
- Max tpd of 6.5 ns at 5 V
- Typical VOLP (Output Ground Bounce) <0.8 V at
VCC = 3.3 V, TA = 25°C - Typical VOHV (Output VOH Undershoot) >2.3 V at
VCC = 3.3 V, TA = 25°C - Ioff Supports Live Insertion, Partial Power Down
Mode, and Back Drive Protection - Support Mixed-Mode Voltage Operation on All
Ports - Latch-Up Performance Exceeds 250 mA per JESD 17
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
The ?LV126A quadruple bus buffer gates are designed for 2-V to 5.5-V VCC operation.
These quadruple bus buffer gates are designed for 2-V to 5.5-V VCC operation.
The ?LV126A devices feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
