--- 產品詳情 ---
Features | Self-Test |
Operating temperature range (C) | -40 to 105 |
Vs (Min) (V) | 0 |
Vs (Max) (V) | 26 |
Rating | Catalog |
- Single-chip GFCI controller to aid in the design of UL-943 compliant systems
- Built-in self-test to detect end-of-life, blink the LED, and/ or trip the load switch
- Detect ground fault leakage path, and trip the load switch
- Detect neutral-ground leakage path, and trip the load switch
- Protection against single-component failure
- Dual VDD and GND pins for redundancy
- Integrated noise filter to prevent false trips
- Simultaneously protects against HOT to GND and neutral to GND faults
- Adjustable fault current thresholds through external feedback resistors
- Fast response time
- 150 ms for ±5mA ground fault current
- 85 ms for ±10-mA ground fault current
- 40 ms for ±30-mA ground fault current
- 10 ms for ±50-mA ground fault current
- Onboard shunt regulator powers the system through passives
- Supports 120-V/ 60-Hz or 220-V/ 50-Hz systems
- Operating temperature range: –40 oC to 105 oC
The AFE3010 is a precision, low-power, Ground Fault Circuit Interrupter (GFCI) controller used for detecting ground fault leakage paths in electrical circuits. This device is a single IC solution that continuously monitors an electrical circuit for multiple fault conditions to verify that the system is operating correctly.
In addition to a ground fault leakage detection, the AFE3010 can detect a grounded neutral condition which can also lead to a harmful shock from a connected appliance. The device implements a unique closed-loop grounded neutral detection scheme that eliminates the need for component resonance tuning, resulting in optimized system development time. Periodic self-test is performed once in every 180 cycles of the AC power line to ensure all the components related to ground fault control system are working properly. In case of any component failure the device enables an LED light, and/ or trips a solenoid to open the load switch. In applications where an LED light indicator is not needed, the ALARM pin can be configured as a secondary SCR driver to drive an additional solenoid for redundancy purpose.
The AFE3010 integrates shunt and LDO regulators to directly power from an AC line through a diode bridge and passive components.
The AFE3010 offers flexible configurable options to implement robust application specific protection schemes in different end-equipments such as electrical receptacles, circuit breakers, and so forth.
為你推薦
-
TI數字多路復用器和編碼器SN54HC1512022-12-23 15:12
-
TI數字多路復用器和編碼器SN54LS1532022-12-23 15:12
-
TI數字多路復用器和編碼器CD54HC1472022-12-23 15:12
-
TI數字多路復用器和編碼器CY74FCT2257T2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74LVC157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS258A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS257A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74ALS157A2022-12-23 15:12
-
TI數字多路復用器和編碼器SN74AHCT1582022-12-23 15:12
-
電動汽車直流快充方案設計【含參考設計】2023-08-03 08:08
-
Buck電路的原理及器件選型指南2023-07-31 22:28
-
100W USB PD 3.0電源2023-07-31 22:27
-
基于STM32的300W無刷直流電機驅動方案2023-07-06 10:02
-
上新啦!開發板僅需9.9元!2023-06-21 17:43
-
參考設計 | 2KW AC/DC數字電源方案2023-06-21 17:43
-
千萬不能小瞧的PCB半孔板2023-06-21 17:34