資料介紹
The SSM2302 is a fully integrated, high efficiency, Class-D stereo audio amplifier. It is designed to maximize performance for mobile phone applications. The application circuit requires a minimum of external components and operates from a single 2.5 V to 5.0 V supply. It is capable of delivering 1.4 W of con-tinuous output power with less than 1% THD + N driving an 8 Ω load from a 5.0 V supply.
The SSM2302 features a high efficiency, low noise modulation scheme. It operates with 85% efficiency at 1.4 W into 8 Ω from a 5.0 V supply and has a signal-to-noise ratio (SNR) that is better than 98 dB. PDM modulation is used to provide lower EMI-radiated emissions compared with other Class-D architectures.
The SSM2302 has a micropower shutdown mode with a typical shutdown current of 20 nA. Shutdown is enabled by applying a logic low to the SD pin.
The architecture of the device allows it to achieve a very low level of pop and click. This minimizes voltage glitches at the output during turn-on and turn-off, thus reducing audible noise on activation and deactivation.
The fully differential input of the SSM2302 provides excellent rejection of common-mode noise on the input. Input coupling capacitors can be omitted if the dc input common-mode voltage is approximately VDD/2.
The SSM2302 also has excellent rejection of power supply noise, including noise caused by GSM transmission bursts and RF rectification. PSRR is typically 63 dB at 217 Hz.
The gain can be set to 6 dB or 12 dB utilizing the gain control select pin connected respectively to ground or VDD. Gain can also be adjusted externally by using an external resistor.
The SSM2302 is specified over the commercial temperature range (?40°C to +85°C). It has built-in thermal shutdown and output short-circuit protection. It is available in a 16-lead, 3 mm × 3 mm lead-frame chip scale package (LFCSP).
The SSM2302 features a high efficiency, low noise modulation scheme. It operates with 85% efficiency at 1.4 W into 8 Ω from a 5.0 V supply and has a signal-to-noise ratio (SNR) that is better than 98 dB. PDM modulation is used to provide lower EMI-radiated emissions compared with other Class-D architectures.
The SSM2302 has a micropower shutdown mode with a typical shutdown current of 20 nA. Shutdown is enabled by applying a logic low to the SD pin.
The architecture of the device allows it to achieve a very low level of pop and click. This minimizes voltage glitches at the output during turn-on and turn-off, thus reducing audible noise on activation and deactivation.
The fully differential input of the SSM2302 provides excellent rejection of common-mode noise on the input. Input coupling capacitors can be omitted if the dc input common-mode voltage is approximately VDD/2.
The SSM2302 also has excellent rejection of power supply noise, including noise caused by GSM transmission bursts and RF rectification. PSRR is typically 63 dB at 217 Hz.
The gain can be set to 6 dB or 12 dB utilizing the gain control select pin connected respectively to ground or VDD. Gain can also be adjusted externally by using an external resistor.
The SSM2302 is specified over the commercial temperature range (?40°C to +85°C). It has built-in thermal shutdown and output short-circuit protection. It is available in a 16-lead, 3 mm × 3 mm lead-frame chip scale package (LFCSP).
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- HSW-EUA2318?Ver0 15-W Stereo Class-D Audio Power
- SSM2302:無濾波器高效D類立體聲音頻放大器數據表
- ADAU1590:Class-D音頻電源安培設備過時的數據Sheet
- ADAU1592:Class-D音頻電源流量數據交換
- TPA2018D1,pdf(3-W Mono Class-D
- TPA3001D1,pdf(20W Mono Class-D
- TLV320DAC3101 pdf,datasheet
- SSM2335,pdf datasheet (Class-D
- SSM2319,pdf datasheet (Class-D
- SSM2317,pdf datasheet (Class-D
- SSM2311,pdf datasheet (Class-D
- SSM2306,pdf datasheet (Audio A
- SSM2305,pdf datasheet (D Audio
- SSM2304,pdf datasheet (Class-D Stereo Audio Amplifier)
- SSM2301,pdf datasheet (Class-D
- SSM框架的源碼解析與理解 331次閱讀
- SSM與Hibernate的整合使用 205次閱讀
- 基于MM32F0163D7P的USB Audio Class(UAC)音頻設備 1405次閱讀
- 基于SSM的學生管理系統 1096次閱讀
- 基于SSM框架的新聞管理系統 1384次閱讀
- 基于SSM框架的酒店后臺管理系統 1012次閱讀
- 基于SSM框架的畢業設計管理系統 1724次閱讀
- 基于SSM的學生管理系統 953次閱讀
- SystemVerilog中class的基本概念 1886次閱讀
- SystemVerilog中class是什么意思 1316次閱讀
- Class-D功放電路如何選擇比較好的國產廠商進行替代 2028次閱讀
- 基于SSM2211的1.5W音頻放大器電路設計 3295次閱讀
- VHF頻段CISPR 25 CLASS 3基準超標整改的案例 6212次閱讀
- A類 B類 AB類 D類功放的區別你真的知道嗎 11.4w次閱讀
- 基于CS35L01-3設計的2.9W D類音頻放大技術 1228次閱讀
下載排行
本周
- 1三相逆變主電路的原理圖和PCB資料合集免費下載
- 27.35 MB | 87次下載 | 1 積分
- 2蘋果iphone 11電路原理圖
- 4.98 MB | 10次下載 | 5 積分
- 3開關升壓型鋰電池充電管理芯片F(xiàn)LD5302/3數據手冊
- 2.33 MB | 1次下載 | 免費
- 4匯編語言教學中文資料
- 1.43 MB | 1次下載 | 免費
- 5FS7203低壓降線性穩壓器數據手冊
- 1.67 MB | 次下載 | 免費
- 6HC-Z系列激光位移傳感器產品手冊
- 0.34 MB | 次下載 | 免費
- 7PC3832 42V反激式隔離開關電源控制器數據手冊
- 1.86 MB | 次下載 | 免費
- 8PC102H 用于 USB Type-C PD3.2線材的 240WeMarker 芯片數據手冊
- 0.45 MB | 次下載 | 免費
本月
- 1涂鴉各WiFi模塊原理圖加PCB封裝
- 11.75 MB | 89次下載 | 1 積分
- 2三相逆變主電路的原理圖和PCB資料合集免費下載
- 27.35 MB | 87次下載 | 1 積分
- 3錦銳科技CA51F2 SDK開發包
- 24.06 MB | 46次下載 | 1 積分
- 4錦銳CA51F005 SDK開發包
- 19.47 MB | 19次下載 | 1 積分
- 5PCB的EMC設計指南
- 2.47 MB | 16次下載 | 1 積分
- 6HC05藍牙原理圖加PCB
- 15.76 MB | 13次下載 | 1 積分
- 7蘋果iphone 11電路原理圖
- 4.98 MB | 10次下載 | 5 積分
- 8常用電子元器件介紹
- 3.21 MB | 6次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935130次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420064次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233089次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191390次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183343次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81591次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73815次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65989次下載 | 10 積分
評論