針對J1939協議培訓要求，構建了一個基于J1939協議的汽車總線培訓實驗系統。系統硬件由計算機、Kvaser CAN總線分析儀以及基于J1939協議的汽車CAN總線模塊包括儀表板模塊、車身電器模塊、發動機ECU模塊等組成。系統界面由WarwickX-Analyser設計，測試結果直觀地顯示在顯示器上。系統實時監控汽車J939數據并能完整記錄、顯示波形和打印。
關鍵詞： J1939 協議汽車 CAN 總線實驗系統
Abstract： An Experimental System of Vehicle can bus for training and teaching purpose based on J1939 protocol was established. The system hardware was composed of notebook, Kvaser CAN bus analyzer and CAN bus modules including meter board module, vehicle body modules, engine ECU module and so forth. And the system operating interface was using X-analyser，an CAN analyzing and simulating software, with high layer protocol test results displayed on screen. This system can measure dynamic J1939 signals and output graph accordingly.
Key words：J1939 protocol, vehicle CAN bus, experiment system