電梯是現代高層建筑不可缺少的交通工具，目前多數電梯采用 PLC 控制。本文提出了一種基于Lonworks 現場總線技術的電梯控制系統的設計方法。論文先介紹了Lonworks 現場總線技術的概述，然后重點介紹了電梯控制系統的硬件組成：電梯控制系統由四部分組成。分別是電梯控制硬件模型，控制模塊，LonBuilder 開發平臺，本地監控機。并且編制程序調度電梯運行。實驗測試達到了預期的效果。
關鍵詞： Lonworks 技術；電梯控制模型；控制系統
Abstract: Elevator is necessary parts of an high buildings in modern times. At the present
times ,elevator is controlled by PLC .The paper introduced a design method of elevator
control system based on Lonworks field bus technology.The article introduce the
summarization of Lonworks field bus technology firstly,and emphasize the hardware
composing of elevator control system .The elevator control system is composed of
four parts.the hardware model of elevator control system,control model,LonBuilder
platform ,vicinal monitor.The elevator control system is tested by progress and
emulation result was verified.
Key words: LonWorks technology;elevator control model; control system