現代通信系統要求通信距離遠、通信容量大、傳輸質量好。作為其關鍵技術之一的調
制解調技術一直是人們研究的一個重要方向。本論文主要討論和仿真了基于CPLD 的FSK、4FSK 系統單元設計，并對調制解調系統和CPLD 設計方法進行了相關的研究。以VHDL 作 為設計的硬件描述語言，在Altera 公司的Maxplus2 開發平臺上進行了程序設計及波形仿真。對各個模塊進行CPLD 的建模，然后對各個模塊的設計內容進行了層層細化，最終達到模塊的具體軟硬件實現。
關鍵詞：頻率鍵控系統、CPLD、VHDL
Abstract: Long distance, large capability and high quality of transmission are required in modern communication system. Modulation and demodulation, which is one of the most key techniques in communication, has been always an important aspect people research. This thesis primarily focused on the modulation and demodulation system and the design technique of CPLD, and also discussed and simulated the digitalized FSK、4FSK systems based on CPLD. The author utilized VHDL to be the hardware describing language of design and has been waveform simulated on the basis of a CPLD development platform Maxplus2 developed by Altera. “TOP-TO-DOWN” is the main feature of this design. CPLD modeling has firstly been done for each module of system, then the design content divided into smaller parts layer to layer, and finally achieved both in hardware and software in details. The whole program has passed the hardware debugging on CPLD experiment exploitation board which takes EPM7128SLC84-7 to be the main chip.
KeyWords: FSK; CPLD; VHDL