在线观看www成人影院-在线观看www日本免费网站-在线观看www视频-在线观看操-欧美18在线-欧美1级

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
電子發燒友網>電子資料下載>類型>參考設計>AD714X輸入CapTouch?可編程控制器Linux驅動程序

AD714X輸入CapTouch?可編程控制器Linux驅動程序

2021-05-13 | pdf | 463.71KB | 次下載 | 2積分

資料介紹

This version (03 Jan 2021 21:45) was approved by Robin Getz.The Previously approved version (11 Feb 2016 21:10) is available.Diff

AD714X Input CapTouch? Programmable Controller Linux Driver

Supported Devices

Evaluation Boards

Description

Capacitance Touch Sensors

Capacitance sensors detect a change in capacitance when something or someone approaches or touches the sensor. The technique has been used in industrial applications for many years to measure liquid levels, humidity, and material composition. A newer application, coming into widespread use, is in human-to-machine interfaces. Mechanical buttons, switches, and jog wheels have long been used as the interface between the user and the machine. Because of their many drawbacks, however, interface designers have been increasingly looking for more reliable solutions. Capacitive sensors can be used in the same manner as buttons, but they also can function with greater versatility, for example, when implementing a 128-position scroll bar.

For more info on how these types of sensors work, take a peek at the ADI web site.

Overview

Implementing a capacitive touch sensor solution using the AD714x requires three components:

  • the AD714x capacitive-to-digital converter IC,
  • sensors on a PCB or Flex Circuit,
  • software to communicate with the AD714x.

The sensor traces can be any number of different shapes and sizes. Buttons, wheels, scroll-bar, joypad, and touchpad shapes can be laid out as traces on the sensor PCB.

ad40-10_07a.jpg ad40-10_07b.jpg ad40-10_07c.jpg ad40-10_07d.jpg ad40-10_07e.jpg ad40-10_07f.jpg

Many options for implementing the user interface are available to the designer, ranging from simply replacing mechanical buttons with capacitive button sensors to eliminating buttons by using a joypad with eight output positions, or a scroll wheel that gives 128 output positions.

The number of sensors that can be implemented using a single device depends on the type of sensors required. The AD7142 has 14 capacitance input pins and 12 conversion channels, the AD7143 and AD7148 have 8 capacitance input pins and 8 conversion channels, and the AD7147 and AD7147A have 13 capacitance input pins and 12 conversion channels.

Configuration

Software configurable features

Source Code

Status

Source Mainlined?
git Yes

Files

In Linux, there are three driver modules for the AD714x: linux-2.6.x/drivers/input/misc/ad714x.c linux-2.6.x/drivers/input/misc/ad714x-spi.c linux-2.6.x/drivers/input/misc/ad714x-i2c.c.

ad714x.c fulfills the common arithmetic and state machines for sliders, keypads, touchpads and so on. ad714x-spi.c and ad714x-i2c.c, which call common probe/remove entries in ad714x.c, merge the bottom ad714x driver into Linux SPI/I2C device driver framework. The code included works with the AD7142 and AD7147 demo board. Note that this code is covered under the GPL - if you want non-GPL source, have a look at ADI's Web site.

Example platform device initialization

For compile time configuration, it’s common Linux practice to keep board- and application-specific configuration out of the main driver file, instead putting it into the board support file.

For devices on custom boards, as typical of embedded and SoC-(system-on-chip) based hardware, Linux uses platform_data to point to board-specific structures describing devices and how they are connected to the SoC. This can include available ports, chip variants, preferred modes, default initialization, additional pin roles, and so on. This shrinks the board-support packages (BSPs) and minimizes board and application specific #ifdefs in drivers.

21 Oct 2010 16:10

platform data, defines how the PCB info is implemented.

Declaring I2C devices

Unlike PCI or USB devices, I2C devices are not enumerated at the hardware level. Instead, the software must know which devices are connected on each I2C bus segment, and what address these devices are using. For this reason, the kernel code must instantiate I2C devices explicitly. There are different ways to achieve this, depending on the context and requirements. However the most common method is to declare the I2C devices by bus number.

This method is appropriate when the I2C bus is a system bus, as in many embedded systems, wherein each I2C bus has a number which is known in advance. It is thus possible to pre-declare the I2C devices that inhabit this bus. This is done with an array of struct i2c_board_info, which is registered by calling i2c_register_board_info().

So, to enable such a driver one need only edit the board support file by adding an appropriate entry to i2c_board_info.

For more information see: Documentation/i2c/instantiating-devices

21 Oct 2010 16:10

For AD7142 demo board, the platform information is:

Declaring SPI slave devices

Unlike PCI or USB devices, SPI devices are not enumerated at the hardware level. Instead, the software must know which devices are connected on each SPI bus segment, and what slave selects these devices are using. For this reason, the kernel code must instantiate SPI devices explicitly. The most common method is to declare the SPI devices by bus number.

This method is appropriate when the SPI bus is a system bus, as in many embedded systems, wherein each SPI bus has a number which is known in advance. It is thus possible to pre-declare the SPI devices that inhabit this bus. This is done with an array of struct spi_board_info, which is registered by calling spi_register_board_info().

For more information see: Documentation/spi/spi-summary

21 Oct 2010 16:10

For AD7147 demo board, the platform information is:

Adding Linux driver support

To select it from menuconfig:

Device Drivers  --->
  Input device support  --->
   [*]   Miscellaneous devices  --->
    <*>   Analog Devices AD714x Capacitance Touch Sensor
       <*>     support I2C bus connection
       <*>     support SPI bus connection

Hardware configuration

We connected the AD7142 demo board to the TWI/I2C connector and AD7147 demo board to the SPI connector on the BF537 STAMP board.

For BF537 STAMP board, please set SW5-3 off as the interrupt input.

And For AD7147 eval-board, please set S4-2 on and other positions off.

Driver testing

Some testing output from the event_test application:

root:~> modprobe ad7142.ko 
input: ad7142 joystick as /class/input/input0
ad7142_js_attach: at 0x58
root:~> event_test /dev/input/event0 
Input driver version is 1.0.0
Input device ID: bus 0x18 vendor 0x1 product 0x1 version 0x100
Input device name: "ad7142 joystick"
Supported events:
  Event type 0 (Reset)
    Event code 0 (Reset)
    Event code 1 (Key)
  Event type 1 (Key)
    Event code 103 (Up)
    Event code 105 (Left)
    Event code 106 (Right)
    Event code 108 (Down)
    Event code 294 (BaseBtn)
    Event code 295 (BaseBtn2)
    Event code 296 (BaseBtn3)
    Event code 297 (BaseBtn4)
Testing ... (interrupt to exit)
Event: time 398.520833, type 0 (Reset), code 0 (Reset), value 0
Event: time 400.734865, type 1 (Key), code 108 (Down), value 1
Event: time 400.734874, type 0 (Reset), code 0 (Reset), value 0
Event: time 400.853353, type 1 (Key), code 108 (Down), value 0
Event: time 400.853360, type 0 (Reset), code 0 (Reset), value 0
Event: time 400.930182, type 1 (Key), code 103 (Up), value 1
Event: time 400.931390, type 0 (Reset), code 0 (Reset), value 0
Event: time 401.046258, type 1 (Key), code 103 (Up), value 0
Event: time 401.047461, type 0 (Reset), code 0 (Reset), value 0
Event: time 402.361193, type 1 (Key), code 294 (BaseBtn), value 1
Event: time 402.362403, type 0 (Reset), code 0 (Reset), value 0
Event: time 402.555558, type 1 (Key), code 294 (BaseBtn), value 0
Event: time 402.556760, type 0 (Reset), code 0 (Reset), value 0
Event: time 402.942508, type 1 (Key), code 295 (BaseBtn2), value 1
Event: time 402.942516, type 0 (Reset), code 0 (Reset), value 0

More Information

下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1電子電路原理第七版PDF電子教材免費下載
  2. 0.00 MB  |  1491次下載  |  免費
  3. 2單片機典型實例介紹
  4. 18.19 MB  |  95次下載  |  1 積分
  5. 3S7-200PLC編程實例詳細資料
  6. 1.17 MB  |  27次下載  |  1 積分
  7. 4筆記本電腦主板的元件識別和講解說明
  8. 4.28 MB  |  18次下載  |  4 積分
  9. 5開關電源原理及各功能電路詳解
  10. 0.38 MB  |  11次下載  |  免費
  11. 6100W短波放大電路圖
  12. 0.05 MB  |  4次下載  |  3 積分
  13. 7基于單片機和 SG3525的程控開關電源設計
  14. 0.23 MB  |  4次下載  |  免費
  15. 8基于AT89C2051/4051單片機編程器的實驗
  16. 0.11 MB  |  4次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234313次下載  |  免費
  3. 2PADS 9.0 2009最新版 -下載
  4. 0.00 MB  |  66304次下載  |  免費
  5. 3protel99下載protel99軟件下載(中文版)
  6. 0.00 MB  |  51209次下載  |  免費
  7. 4LabView 8.0 專業版下載 (3CD完整版)
  8. 0.00 MB  |  51043次下載  |  免費
  9. 5555集成電路應用800例(新編版)
  10. 0.00 MB  |  33562次下載  |  免費
  11. 6接口電路圖大全
  12. 未知  |  30320次下載  |  免費
  13. 7Multisim 10下載Multisim 10 中文版
  14. 0.00 MB  |  28588次下載  |  免費
  15. 8開關電源設計實例指南
  16. 未知  |  21539次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935053次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537793次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234313次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191183次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183277次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138039次下載  |  免費
主站蜘蛛池模板: 老师喂我吃她的奶水脱她胸罩 | brazzersvideosexhd欧美高清 | 男女性生动态免费视频 | 69日本xxxxxxxxx13 69日本xxxxxxxxx18 | 国产卡1卡2卡三卡网站免费 | 天堂电影在线观看免费入口 | 一区卡二区卡三区卡视频 | 丁香花五月婷婷 | 欧美极品色影院 | 欧美三级免费观看 | 99国产成人精品2021 | xxx日本69| 欧美18同性gay视频 | 国产三级在线播放 | 国产亚洲一区二区三区在线 | 大杳蕉伊人狼人久久一本线 | 年下攻高h好涨 | 日本一区二区免费看 | 黄色的视频网站在线观看 | 操碰人人 | 免费无毒片在线观看 | 一级一级特黄女人精品毛片 | 四虎现在的网址入口 | 人人插人人费 | 久久久久久久综合色一本 | 日本成人一级片 | 激情婷婷综合 | 国产成人亚洲综合a∨婷婷 国产成人一区二区三中文 国产成人一区二区在线不卡 | 男人透女人超爽视频免费 | 日本最顶级丰满的aⅴ艳星 日本最好的免费影院 | 性色成人网 | 97影院理论| 亚洲欧美v视色一区二区 | 私色综合网| 中文字幕乱码人成乱码在线视频 | 黄色插插插 | 国产三级精品视频 | 午夜精品福利在线 | 人人干操 | 免费人成a大片在线观看动漫 | 天天爽夜夜爽人人爽一区二区 |