在线观看www成人影院-在线观看www日本免费网站-在线观看www视频-在线观看操-欧美18在线-欧美1级

搜索歷史

清空
搜索熱詞
      0
      • 聊天消息
      • 系統消息
      • 評論與回復
      VIP于 到期 續費
      登錄后你可以
      • 下載海量資料
      • 學習在線課程
      • 觀看技術視頻
      • 寫文章/發帖/加入社區
      會員中心
      創作中心
      發布
      創作活動

      完善資料讓更多小伙伴認識你，還能領取20積分哦，立即完善>

      3天內不再提示

      如何在虛擬機Virtual Box上跑VxWorks呢？

      冬至子 ? 來源：北南南北 ? 作者：VxWorks Club ? 2023-06-15 15:15 ? 次閱讀

      先來看一張效果圖：

      圖片

      在tornado端運行shell訪問VxWorks

      圖片

      成功運行第一個程序，輸出了visualbox can run the vxworks !

      確實比在vmware下的速度快多了！

      不過telnet組件添加后，有時登錄不了，還是上一張登錄成功的圖吧

      用 i 命令輸出當前的任務：

      圖片

      下面看看我們的配置是怎么樣的：

      visualbox的網卡設置VirtualBox Host-Only Network：

      圖片

      bsp用的是C:\\Tornado2.2\\target\\config\\pcPentium

      congfig.h配置如下


      /* pc386/config.h - PC [34]86/Pentium/Pentium[234] configuration header */ 

/* Copyright 1984-2002 Wind River Systems, Inc. */ 

/* 
modification history 
-------------------- 
04h,12jul02,pai Changed RAM_HIGH_ADRS, RAM_LOW_ADRS, and 
                 LOCAL_MEM_LOCAL_ADRS. 
04g,12jul02,dmh added check for !SYS_WARM_BIOS and set NV_RAM_SIZE 
04f,27jun02,hdn made SYS_CLK_RATE_MAX an arch dependent macro (spr 27449) 
04e,05jun02,hdn added 36Bit MMU support with 2MB page size 
04d,09may02,hdn added Pentium4 Asymmetric Multi Processor configuration 
04c,10may02,pai In an effort to reduce the compiled size of default images, 
                 the ATA driver (INCLUDE_ATA) and PC console 
                 (INCLUDE_PC_CONSOLE) are no longer configured into a build by 
                 default (SPR 77193). 
04b,01may02,pai Remove ATAPI/5 configuration introduced in version 03w. 
04a,25apr02,rhe Added C++ Protection 
03z,24apr02,pai Added a sysHwInit0() prototype, as a generic interface of 
                 this name has yet to be defined. 
03y,22apr02,pai Removed configuration constants for netif drivers that have 
                 an END equivalent. Made DEC and GEI END driver config 
                 constant names consistent with other BSP END driver config 
                 constant names. Removed INCLUDE_EX and INCLUDE_ENP 
                 config constants (SPR 75629). 
03x,09apr02,pai Reworked ATA configuration and documentation (SPR 73848). 
                 Remove sysCpuProbe() dependence upon INCLUDE_CACHE_SUPPORT 
                 configuration (SPR 74951). Updated the configuration for 
                 components that have a dependency on INCLUDE_PCI (SPR 75634). 
                 Added sysInumTbl[] table declaration required for 
                 INT_NUM_GET() (SPR 75710). 
03w,15apr02,rip support for ATAPI/5  
03v,01apr02,jkf Added _WRS_BSP_DEBUG_NULL_ACCESS to generate exception when 
                 code accesses to lower page of memory, null ptr, occur 
03u,27mar02,pai No longer explicitly setting WDB_COMM_TYPE to WDB_COMM_END, 
                 as this is now done in configAll.h (SPR 73338). 
03t,22mar02,pai Halt in idle mode is now the default for Pentium-based BSPs 
                 (SPR# 73324). 
03s,13mar02,hdn updated INT_NUM_GET(), added IPI/SM for HTT (spr 73738) 
03r,12mar02,pai Removed '#ifdef TRUE' around INCLUDE_PC_CONSOLE (SPR# 73325). 
03q,07mar02,hdn added SNOOP_ENABLE to USER_D_CACHE_MODE for P5 (spr 73938) 
         undefed PMC, removed MTRR_GET for P5 (spr 73939) 
03q,04feb02,mrs Allow console selection from command line. 
03p,04dec01,jkf adding macros for reboot device strings 
                 changed to #undef INCLUDE_LPT by default. 
03o,27nov01,dmh move include of iacsfl.h from sysLib.c to config.h 
03n,16nov01,ahm added power management support (SPR# 32599) 
03m,13nov01,hdn added comment for IOAPIC configuration. 
03l,25oct01,pai Removed INT_NUM_FEIx and FEIx_INT_VEC constants. Added 
                 support for gei82543End driver (jln). Added missing 
                 INT_NUM_MSE definition. 
03k,24oct01,hdn added the mother board and ICH definitions for PENTIUM4. 
         enabled TSC timestamp counter for P5. cleaned up. 
03j,24oct01,dmh add default macros for COM3 and COM4 
03i,23oct01,pai Removed obsolete INCLUDE_SLIP configuration constant. 
03h,01oct01,hdn fixed typo LPT_INT_LVL0 to LPT0_INT_LVL. 
03g,26sep01,pai Added support for dec21x40End driver. Added INT_NUM_MSE 
                 and MSE_INT_VEC backward compatibility values for WindML. 
03f,14sep01,hdn replaced INT_VEC_GET() with INT_NUM_GET() (spr 69775) 
         made TIMER_CLOCK_HZ configurable for APIC TIMER 
         incremented BSP_REV to 2, incremented SYS_CLK_RATE_MAX 
         added LPT[012]_xxx macros (spr 30067) on behalf of pai 
03e,16aug01,hdn added PENTIUM2/3/4 support 
03d,15aug01,hdn moved INCLUDE_SCSI2 in the previous FALSE clause. 
03c,14oct99,jk added defines for sound support. 
03b,15mar99,cn corrected cross-dependencies between INCLUDE_PCI and 
         INCLUDE_LN_97X_END, INCLUDE_EL_3C90X_END (SPR# 25680). 
03a,12mar99,cn added support for el3c90xEnd driver (SPR# 25327). 
02z,08mar99,sbs added support for SMC Elite Ultra ethernet card.(SPR #25234) 
                 moved INCLUDE_LN_97X_END into INCLUDE_END loop. 
                 added support for ne2000End driver (SPR #25398) 
02y,26feb99,dat removed FEI from NETIF_USR_ENTRIES (23818) 
02x,25feb99,hdn added PentiumPro's MESI bus snoop. 
         removed GLOBAL bit from VM_STATE_FOR_MEM_OS. 
02w,24feb99,pr removed CONSOLE_TTY define for PC_CONSOLE (SPR#23075) 
02v,01feb99,jkf added END support for AMD 7997x PCI PCNet-FAST card. 
                 made FEI_END the default. 
02u,26nov98,ms_ add elt3c509 END support 
02t,26jan99,jkf INCLUDE_ADD_BOOTMEM added. INCLUDE_END 
                 is again made the default. SPR#21338 
02s,12nov98,dat END drivers are not selected by default (See SPR xxxxx) 
02r,28aug98,sbs changed WDB_COMM_TYPE to WDB_COMM_END. 
02q,03aug98,cn new BSP revision id 
02o,07jul98,db changed BSP_VERSION to "1.2" and BSP_REVISION to "/0". 
         added BSP_VER_1_2 macro (Tornado 2.0 release). 
02n,28may98,hdn added support for APIC. 
02m,12may98,hdn merged with pcPentium/config.h. obsolete INCLUDE_IDE. 
         changed LOCAL_MEM_SIZE to 8MB. cleaned up. 
02l,24apr98,yp added defines for TFFS. 
02k,31mar98,cn Added Enhanced  


Network Driver support. 
02j,24mar98,sbs corrected SYS_WARM_FD to be default SYS_WARM_TYPE. 
02i,18mar98,sbs added SYS_WARM_BIOS, SYS_WARM_FD, SYS_WARM_ATA. 
                 added SYS_INT_TRAPGATE, SYS_INT_INTGATE. 
02h,16jan98,gnn Removed documentation and support for END, 
         not supported yet. 
02g,28apr97,gnn Added documentation for END_OVERRIDE and INCLUDE_END. 
02f,25apr97,gnn Added Enhanced Network Driver support. 
02h,05aug97,dds added INCLUDE_AIC_7880. 
02g,11jul97,dds #undef INCLUDE_CDROMFS. 
02f,10jul97,dds added SCSI-2 support. REV level 2 
02e,26feb97,mas added defs of USER_RESERVED_MEM and LOCAL_MEM_AUTOSIZE; added 
         warm boot parameters (SPR 7806, 7850). 
02d,22nov96,dat fixed warning from NETIF_USR_ENTRIES. 
02c,20nov96,hdn added support for PRO100B. 
02b,01nov96,hdn added support for PCMCIA. 
02a,10oct96,dat release 1.1/1, (Tornado 1.0.1) 
01z,03sep96,hdn added the compression support. removed BOOTABLE macro. 
01y,09aug96,hdn renamed INT_VEC_IRQ0 to INT_NUM_IRQ0. 
01x,05aug96,hdn changed INT_LVL_ENE 0x0b to 0x05(default int level). 
01w,19jul96,hdn added support for ATA driver. 
01v,25jun96,hdn added support for TIMESTAMP timer. 
01u,14jun96,hdn added support for PCI bus. 
01t,13jun96,hdn added INCLUDE_ESMC for SMC91c9x Ethernet driver. 
01s,28sep95,dat new BSP revision id 
01r,14jun95,hdn added INCLUDE_SW_FP for FPP software emulation library. 
01q,08jun95,ms changed PC_CONSOLE defines. 
01p,12jan95,hdn changed SYS_CLK_RATE_MAX to a safe number. 
01o,08dec94,hdn changed EEROM to EEPROM. 
01n,15oct94,hdn changed CONFIG_ELC and CONFIG_ULTRA. 
         added INCLUDE_LPT for LPT driver. 
         added INCLUDE_EEX32 for Intel EtherExpress32. 
         changed the default boot line. 
         moved INT_VEC_IRQ0 to pc.h. 
01m,03jun94,hdn deleted shared memory network related macros. 
01l,28apr94,hdn changed ROM_SIZE to 0x7fe00. 
01k,22apr94,hdn added macros INT_VEC_IRQ0, FD_DMA_BUF, FD_DMA_BUF_SIZE. 
         moved a macro PC_KBD_TYPE from pc.h. 
         added SLIP driver with 9600 baudrate. 
01j,15mar94,hdn changed ULTRA configuration. 
         changed CONSOLE_TTY number from 0 to 2. 
01i,09feb94,hdn added 3COM EtherlinkIII driver and Eagle NE2000 driver. 
                 changed RAM_HIGH_ADRS and RAM_LOW_ADRS. 
                 changed LOCAL_MEM_SIZE to 4MB. 
01h,27jan94,hdn changed RAM_HIGH_ADRS 0x110000 to 0x00108000. 
         changed RAM_ENTRY 0x10000 to 0x00008000. 
01g,17dec93,hdn added support for Intel EtherExpress driver. 
01f,24nov93,hdn added INCLUDE_MMU_BASIC. 
01e,08nov93,vin added support for pc console drivers. 
01d,03aug93,hdn changed network board's address and vector. 
01c,22apr93,hdn changed default boot line. 
01b,07apr93,hdn renamed compaq to pc. 
01a,15may92,hdn written based on frc386. 
*/ 

/* 
This module contains the configuration parameters for the 
PC [34]86/Pentium/Pentium[234]. 
*/ 

#ifndef INCconfigh 
#define INCconfigh 

#ifdef __cplusplus 
extern "C" { 
#endif 

/* BSP version/revision identification, before configAll.h */ 

#define BSP_VER_1_1 1 /* 1.2 is backward compatible with 1.1 */ 
#define BSP_VER_1_2 1 
#define BSP_VERSION "1.2" 
#define BSP_REV "/2" /* 2 for Tornado 2.2 */ 

#include "configAll.h" 
#include "pc.h" 


/* BSP specific prototypes that must be in config.h */ 

#ifndef _ASMLANGUAGE 
    IMPORT void sysHwInit0 (void); 
    IMPORT UINT8 sysInumTbl[]; /* IRQ vs intNum table */ 
#endif 

/* BSP specific initialisation (before cacheLibInit() is called) */ 

#define INCLUDE_SYS_HW_INIT_0 
#define SYS_HW_INIT_0() (sysHwInit0()) 


/* Default boot line */ 

#if (CPU == I80386) 
#define DEFAULT_BOOT_LINE \\ 
    "fd=0,0(0,0)host:/fd0/vxWorks.st h=90.0.0.3 e=90.0.0.50 u=target" 
#elif (CPU == I80486) 
#define DEFAULT_BOOT_LINE \\ 
    "fd=0,0(0,0)host:/fd0/vxWorks.st h=90.0.0.3 e=90.0.0.50 u=target" 
#elif (CPU == PENTIUM) 
#define DEFAULT_BOOT_LINE \\ 
    "lnPci(0,0)host:d:\\\\vxWorks h=192.168.102.1 e=192.168.102.88 u=target pw=target tn=target" 
#elif (CPU == PENTIUM2) 

#define DEFAULT_BOOT_LINE \\ 
    "fd=0,0(0,0)host:/fd0/vxWorks.st h=90.0.0.3 e=90.0.0.50 u=target" 
#elif (CPU == PENTIUM3) 
#define DEFAULT_BOOT_LINE \\ 
    "fd=0,0(0,0)host:/fd0/vxWorks.st h=90.0.0.3 e=90.0.0.50 u=target" 
#elif (CPU == PENTIUM4) 
#define DEFAULT_BOOT_LINE \\ 
    "fd=0,0(0,0)host:/fd0/vxWorks.st h=90.0.0.3 e=90.0.0.50 u=target" 
#endif /* (CPU == I80386) */ 

/* Warm boot (reboot) devices and parameters */ 

#define SYS_WARM_BIOS 0 /* warm start from BIOS */ 
#define SYS_WARM_FD 1 /* warm start from FD */ 
#define SYS_WARM_ATA 2 /* warm start from ATA */ 
#define SYS_WARM_TFFS 3 /* warm start from DiskOnChip */ 

#define SYS_WARM_TYPE SYS_WARM_FD /* warm start device */ 
#define SYS_WARM_FD_DRIVE 0 /* 0 = drive a:, 1 = b: */ 
#define SYS_WARM_FD_TYPE 0 /* 0 = 3.5" 2HD, 1 = 5.25" 2HD */ 
#define SYS_WARM_ATA_CTRL 0 /* controller 0 */ 
#define SYS_WARM_ATA_DRIVE 0 /* 0 = c:, 1 = d: */ 
#define SYS_WARM_TFFS_DRIVE 0 /* 0 = c: (DOC) */ 

/* Warm boot (reboot) device and filename strings */ 

/*  
 * BOOTROM_DIR is the device name for the device containing 
 * the bootrom file. This string is used in sysToMonitor, sysLib.c  
 * in dosFsDevCreate(). 
 */ 

#define BOOTROM_DIR "/vxboot/" 

/*  
 * BOOTROM_BIN is the default path and file name to either a binary  
 * bootrom file or an A.OUT file with its 32 byte header stripped. 
 * Note that the first part of this string must match BOOTROM_DIR 
 * The "bootrom.sys" file name will work with VxLd 1.5. 
 */ 

#define BOOTROM_BIN "/vxboot/bootrom.sys" 

/*  
 * BOOTROM_AOUT is that default path and file name of an A.OUT bootrom 
 * _still containing_ its 32byte A.OUT header. This is legacy code. 
 * Note that the first part of this string must match BOOTROM_DIR 
 * The "bootrom.dat" file name does not work with VxLd 1.5. 
 */ 

#define BOOTROM_AOUT "/vxboot/bootrom.dat" 

/* IDT entry type options */ 

#define SYS_INT_TRAPGATE 0x0000ef00 /* trap gate */ 
#define SYS_INT_INTGATE 0x0000ee00 /* int gate */ 

/* driver and file system options */ 

#define INCLUDE_DOSFS /* include dosFs file system */ 
#define INCLUDE_FD /* include floppy disk driver */ 
#undef INCLUDE_ATA /* include IDE/EIDE(ATA) hard disk driver */ 
#undef INCLUDE_LPT /* include parallel port driver */ 
#undef INCLUDE_TIMESTAMP /* include TIMESTAMP timer for Wind View */ 
#undef INCLUDE_TFFS /* include TrueFFS driver for Flash */ 
#undef INCLUDE_PCMCIA /* include PCMCIA driver */ 

/* TFFS driver options */ 

#ifdef INCLUDE_TFFS 
# define INCLUDE_SHOW_ROUTINES 
#endif /* INCLUDE_TFFS */ 

/* SCSI driver options */ 

#undef INCLUDE_SCSI /* include SCSI driver */ 
#undef INCLUDE_AIC_7880 /* include AIC 7880 SCSI driver */ 
#undef INCLUDE_SCSI_BOOT /* include ability to boot from SCSI */ 
#undef INCLUDE_CDROMFS /* file system to be used */ 
#undef INCLUDE_TAPEFS /* file system to be used */ 
#undef INCLUDE_SCSI2 /* select SCSI2 not SCSI1 */ 

/* Network driver options */ 

#define INCLUDE_END /* Enhanced Network Driver Support */ 

#undef INCLUDE_DEC21X40_END /* (END) DEC 21x4x PCI interface */ 
#undef INCLUDE_EL_3C90X_END /* (END) 3Com Fast EtherLink XL PCI */ 
#undef INCLUDE_ELT_3C509_END /* (END) 3Com EtherLink III interface */ 
#undef INCLUDE_ENE_END /* (END) Eagle/Novell NE2000 interface */ 
#undef INCLUDE_FEI_END /* (END) Intel 8255[7/8/9] PCI interface */ 
#undef INCLUDE_GEI8254X_END /* (END) Intel 82543/82544 PCI interface */ 
#define INCLUDE_LN_97X_END /* (END) AMD 79C97x PCI interface */ 
#undef INCLUDE_ULTRA_END /* (END) SMC Elite16 Ultra interface */ 

#undef INCLUDE_BSD /* BSD / Netif Driver Support (Deprecated) */ 

#undef INCLUDE_EEX /* (BSD) Intel EtherExpress interface */ 
#undef INCLUDE_EEX32 /* (BSD) Intel EtherExpress flash 32 */ 
#undef INCLUDE_ELC /* (BSD) SMC Elite16 interface */ 
#undef INCLUDE_ESMC /* (BSD) SMC 91c9x Ethernet interface */ 

/* PCMCIA driver options */ 

#ifdef INCLUDE_PCMCIA 

# define INCLUDE_ATA /* include ATA driver */ 
# define INCLUDE_SRAM /* include SRAM driver */ 
# undef INCLUDE_TFFS /* include TFFS driver */ 

# ifdef INCLUDE_NETWORK 
# define INCLUDE_BSD /* include BSD / Netif Driver Support */ 
# define INCLUDE_ELT /* (BSD) 3Com EtherLink III interface */ 
# endif /* INCLUDE_NETWORK */ 

#endif /* INCLUDE_PCMCIA */ 


/* Include PCI support for drivers & libraries that require it. */ 

#if defined (INCLUDE_LN_97X_END) || defined (INCLUDE_EL_3C90X_END) || \\ 
    defined (INCLUDE_FEI_END) || defined (INCLUDE_DEC21X40_END) || \\ 
    defined (INCLUDE_GEI8254X_END) || defined (INCLUDE_AIC_7880) || \\ 
    defined (INCLUDE_WINDML) || defined (INCLUDE_USB) 

# define INCLUDE_PCI 

#endif 


/* default MMU options and PHYS_MEM_DESC type state constants */ 

#define INCLUDE_MMU_BASIC /* bundled MMU support */ 

#define VM_STATE_MASK_FOR_ALL \\ 
    VM_STATE_MASK_VALID | VM_STATE_MASK_WRITABLE | VM_STATE_MASK_CACHEABLE 
#define VM_STATE_FOR_IO \\ 
    VM_STATE_VALID | VM_STATE_WRITABLE | VM_STATE_CACHEABLE_NOT 
#define VM_STATE_FOR_MEM_OS \\ 
    VM_STATE_VALID | VM_STATE_WRITABLE | VM_STATE_CACHEABLE 
#define VM_STATE_FOR_MEM_APPLICATION \\ 
    VM_STATE_VALID | VM_STATE_WRITABLE | VM_STATE_CACHEABLE 
#define VM_STATE_FOR_PCI \\ 
    VM_STATE_VALID | VM_STATE_WRITABLE | VM_STATE_CACHEABLE_NOT 


/* default system and auxiliary clock constants 
 * 
 * Among other things, SYS_CLK_RATE_MAX depends upon the CPU and application 
 * work load. The default value, chosen in order to pass the internal test 
 * suite, could go up to PIT_CLOCK. 
 */ 

#define SYS_CLK_RATE_MIN (19) /* minimum system clock rate */ 
#define AUX_CLK_RATE_MIN (2) /* minimum auxiliary clock rate */ 
#define AUX_CLK_RATE_MAX (8192) /* maximum auxiliary clock rate */ 


/* CPU family/type-specific macros and options */ 

#if (CPU == I80386) || (CPU == I80486) /* [34]86 specific macros */ 

/* 
 * software floating point emulation support. DO NOT undefine hardware fp 
 * support in configAll.h as it is required for software fp emulation. 
 */ 

#define INCLUDE_SW_FP /* enable emulator if there is no FPU */ 
#define SYS_CLK_RATE_MAX (PIT_CLOCK/32) /* max system clock rate */ 

#ifdef INCLUDE_TIMESTAMP 
# define INCLUDE_TIMESTAMP_PIT2 /* include PIT2 for timestamp */ 
#endif /* INCLUDE_TIMESTAMP */ 

#elif (CPU == PENTIUM) /* P5 specific macros */ 

#undef INCLUDE_SW_FP /* Pentium has hardware FPP */ 
#undef USER_D_CACHE_MODE /* Pentium write-back data cache support */ 
#define USER_D_CACHE_MODE (CACHE_COPYBACK | CACHE_SNOOP_ENABLE) 
#undef INCLUDE_PMC /* include PMC */ 
#define SYS_CLK_RATE_MAX (PIT_CLOCK/32) /* max system clock rate */ 

#ifdef INCLUDE_TIMESTAMP /* select TSC(default) or PIT2 */ 
# undef INCLUDE_TIMESTAMP_PIT2 /* include PIT2 for timestamp */ 
# define INCLUDE_TIMESTAMP_TSC /* include TSC for timestamp */ 
# define PENTIUMPRO_TSC_FREQ 0 /* TSC freq, 0 for auto detect */ 
#endif /* INCLUDE_TIMESTAMP */ 

#elif (CPU == PENTIUM2) || (CPU == PENTIUM3) || (CPU == PENTIUM4) /* P6,P7 */ 

#undef INCLUDE_SW_FP /* Pentium[234] has hardware FPP */ 
#undef USER_D_CACHE_MODE /* Pentium[234] write-back data cache support */ 
#define USER_D_CACHE_MODE (CACHE_COPYBACK | CACHE_SNOOP_ENABLE) 
#define INCLUDE_MTRR_GET /* get MTRR to sysMtrr[] */ 
#define INCLUDE_PMC /* include PMC */ 
#undef VIRTUAL_WIRE_MODE /* Interrupt Mode: Virtual Wire Mode */ 
#undef SYMMETRIC_IO_MODE /* Interrupt Mode: Symmetric IO Mode */ 
#define SYS_CLK_RATE_MAX (PIT_CLOCK/16) /* max system clock rate */ 

#ifdef INCLUDE_TIMESTAMP /* select TSC(default) or PIT2 */ 
# undef INCLUDE_TIMESTAMP_PIT2 /* include PIT2 for timestamp */ 
# define INCLUDE_TIMESTAMP_TSC /* include TSC for timestamp */ 
# define PENTIUMPRO_TSC_FREQ 0 /* TSC freq, 0 for auto detect */ 
#endif /* INCLUDE_TIMESTAMP */ 

#define INCLUDE_MMU_P6_32BIT /* include 32bit MMU for Pentium[234] */ 
#ifdef INCLUDE_MMU_P6_32BIT 
# undef VM_PAGE_SIZE /* page size could be 4KB, 4MB */ 
# define VM_PAGE_SIZE PAGE_SIZE_4KB /* PAGE_SIZE_4MB */ 
#endif /* INCLUDE_MMU_P6_32BIT */ 
#ifdef INCLUDE_MMU_P6_36BIT 
# undef VM_PAGE_SIZE /* page size could be 4KB, 2MB */ 
# define VM_PAGE_SIZE PAGE_SIZE_4KB /* PAGE_SIZE_2MB */ 
#endif /* INCLUDE_MMU_P6_32BIT */ 

#if defined (INCLUDE_MMU_P6_32BIT) || defined (INCLUDE_MMU_P6_36BIT)  
# undef VM_STATE_MASK_FOR_ALL 
# undef VM_STATE_FOR_IO 
# undef VM_STATE_FOR_MEM_OS 
# undef VM_STATE_FOR_MEM_APPLICATION 
# undef VM_STATE_FOR_PCI 
# define VM_STATE_MASK_FOR_ALL \\ 
        VM_STATE_MASK_VALID | VM_STATE_MASK_WRITABLE | \\ 
        VM_STATE_MASK_CACHEABLE | VM_STATE_MASK_WBACK | VM_STATE_MASK_GLOBAL 
# define VM_STATE_FOR_IO \\ 
        VM_STATE_VALID | VM_STATE_WRITABLE | \\ 
        VM_STATE_CACHEABLE_NOT | VM_STATE_WBACK_NOT | VM_STATE_GLOBAL_NOT 
# define VM_STATE_FOR_MEM_OS \\ 
        VM_STATE_VALID | VM_STATE_WRITABLE | \\ 
        VM_STATE_CACHEABLE | VM_STATE_WBACK | VM_STATE_GLOBAL_NOT 
# define VM_STATE_FOR_MEM_APPLICATION \\ 
        VM_STATE_VALID | VM_STATE_WRITABLE | \\ 
        VM_STATE_CACHEABLE | VM_STATE_WBACK | VM_STATE_GLOBAL_NOT 
# define VM_STATE_FOR_PCI \\ 
        VM_STATE_VALID | VM_STATE_WRITABLE | \\ 
        VM_STATE_CACHEABLE_NOT | VM_STATE_WBACK_NOT | VM_STATE_GLOBAL_NOT 
#endif /* defined (INCLUDE_MMU_P6_32BIT) || defined (INCLUDE_MMU_P6_36BIT) */ 

/*  
 * To enable the IOAPIC, define the mother board from the following list. 
 * If the IOAPIC is already enabled, defining the mother board is not  
 * needed. Related code locates in pciCfgIntStub.c. 
 * D815EEA = Pentium3 + i815e + ICH2(i82801BA) 
 * D850GB = Pentium4 + i850 + ICH2(i82801BA) 
 * The PIRQ[n] is directly handled by IOAPIC in the SYMMETRIC_IO_MODE. 
 */ 

#undef INCLUDE_D815EEA /* Pentium3 + i815e + ICH2 */ 
#undef INCLUDE_D850GB /* Pentium4 + i850 + ICH2 */ 

#if defined (INCLUDE_D815EEA) || defined (INCLUDE_D850GB) 
# define INCLUDE_ICH2 /* ICH2 IO controller hub */ 
#else 
# if (CPU == PENTIUM4) 
# define INCLUDE_ICH3 /* set ICH3 as default */ 
# endif /* (CPU == PENTIUM4) */ 
#endif /* defined (INCLUDE_D815EEA) || defined (INCLUDE_D850GB) */ 

#endif /* (CPU == I80386) || (CPU == I80486) */ 


#define IO_ADRS_ELC 0x240 
#define INT_LVL_ELC 0x0b 
#define MEM_ADRS_ELC 0xc8000 
#define MEM_SIZE_ELC 0x4000 
#define CONFIG_ELC 0 /* 0=EEPROM 1=RJ45+AUI 2=RJ45+BNC */ 

#define IO_ADRS_ULTRA 0x240 
#define INT_LVL_ULTRA 0x0b 
#define MEM_ADRS_ULTRA 0xc8000 
#define MEM_SIZE_ULTRA 0x4000 
#define CONFIG_ULTRA 0 /* 0=EEPROM 1=RJ45+AUI 2=RJ45+BNC */ 

#define IO_ADRS_EEX 0x240 
#define INT_LVL_EEX 0x0b 
#define NTFDS_EEX 0x00 
#define CONFIG_EEX 0 /* 0=EEPROM 1=AUI 2=BNC 3=RJ45 */ 
                /* Auto-detect is not supported, so choose */ 
                /* the right one you're going to use */ 

#define IO_ADRS_ELT 0x240 
#define INT_LVL_ELT 0x0b 
#define NRF_ELT 0x00 
#define CONFIG_ELT 0 /* 0=EEPROM 1=AUI 2=BNC 3=RJ45 */ 

#define IO_ADRS_ENE 0x300 
#define INT_LVL_ENE 0x05 
                /* Hardware jumper is used to set */ 
                /* RJ45(Twisted Pair) AUI(Thick) BNC(Thin) */ 

#define IO_ADRS_ESMC 0x300 
#define INT_LVL_ESMC 0x0b 
#define CONFIG_ESMC 0 /* 0=EEPROM 1=AUI 2=BNC 3=RJ45 */ 
#define RX_MODE_ESMC 0 /* 0=interrupt level 1=task level */ 

#ifdef INCLUDE_EEX32 
# define INCLUDE_EI /* include 82596 driver */ 
# define INT_LVL_EI 0x0b 
# define EI_SYSBUS 0x44 /* 82596 SYSBUS value */ 
# define EI_POOL_ADRS NONE /* memory allocated from system memory */ 
#endif /* INCLUDE_EEX32 */ 


/* 
 * ATA_TYPE  ATA_GEO_FORCE parameters  
 * 
 * ATA_TYPE is defined in h/drv/hdisk/ataDrv.h. The  table 
 * is declared in sysLib.c. 
 */ 

/* controller zero device zero */ 

#define ATA_CTRL0_DRV0_CYL (761) /* ATA 0, device 0 cylinders */ 
#define ATA_CTRL0_DRV0_HDS (8) /* ATA 0, device 0 heads */ 
#define ATA_CTRL0_DRV0_SPT (39) /* ATA 0, device 0 sectors per track */ 
#define ATA_CTRL0_DRV0_BPS (512) /* ATA 0, device 0 bytes per sector */ 
#define ATA_CTRL0_DRV0_WPC (0xff) /* ATA 0, device 0 write pre-compensation */ 

/* controller zero device one */ 

#define ATA_CTRL0_DRV1_CYL (761) /* ATA 0, device 1 cylinders */ 
#define ATA_CTRL0_DRV1_HDS (8) /* ATA 0, device 1 heads */ 
#define ATA_CTRL0_DRV1_SPT (39) /* ATA 0, device 1 sectors per track */ 
#define ATA_CTRL0_DRV1_BPS (512) /* ATA 0, device 1 bytes per sector */ 
#define ATA_CTRL0_DRV1_WPC (0xff) /* ATA 0, device 1 write pre-compensation */ 

/* controller one device zero */ 

#define ATA_CTRL1_DRV0_CYL (761) /* ATA 1, device 0 cylinders */ 
#define ATA_CTRL1_DRV0_HDS (8) /* ATA 1, device 0 heads */ 
#define ATA_CTRL1_DRV0_SPT (39) /* ATA 1, device 0 sectors per track */ 
#define ATA_CTRL1_DRV0_BPS (512) /* ATA 1, device 0 bytes per sector */ 
#define ATA_CTRL1_DRV0_WPC (0xff) /* ATA 1, device 0 write pre-compensation */ 

/* controller one device one */ 

#define ATA_CTRL1_DRV1_CYL (761) /* ATA 1, device 1 cylinders */ 
#define ATA_CTRL1_DRV1_HDS (8) /* ATA 1, device 1 heads */ 
#define ATA_CTRL1_DRV1_SPT (39) /* ATA 1, device 1 sectors per track */ 
#define ATA_CTRL1_DRV1_BPS (512) /* ATA 1, device 1 bytes per sector */ 
#define ATA_CTRL1_DRV1_WPC (0xff) /* ATA 1, device 1 write pre-compensation */ 

/* 
 * ATA_RESOURCE  parameters  
 * 
 * ATA_RESOURCES is defined in h/drv/pcmcia/pccardLib.h. The  
 * table is declared in sysLib.c. Defaults are based on the pcPentium BSP. 
 */ 

/* ATA controller zero ataResources[] parameters */ 

#define ATA0_VCC (5) /* ATA 0 Vcc (3 or 5 volts) */ 
#define ATA0_VPP (0) /* ATA 0 Vpp (5 or 12 volts or 0) */ 
#define ATA0_IO_START0 (0x1f0) /* Start I/O Address 0 for ATA 0 */ 
#define ATA0_IO_START1 (0x3f6) /* Start I/O Address 1 for ATA 0 */ 
#define ATA0_IO_STOP0 (0x1f7) /* Stop I/O Address for ATA 0 */ 
#define ATA0_IO_STOP1 (0x3f7) /* Stop I/O Address for ATA 0 */ 
#define ATA0_EXTRA_WAITS (0) /* ATA 0 extra wait states (0-2) */ 
#define ATA0_MEM_START (0) /* ATA 0 memory start address */ 
#define ATA0_MEM_STOP (0) /* ATA 0 memory start address */ 
#define ATA0_MEM_WAITS (0) /* ATA 0 memory extra wait states */ 
#define ATA0_MEM_OFFSET (0) /* ATA 0 memory offset */ 
#define ATA0_MEM_LENGTH (0) /* ATA 0 memory offset */ 
#define ATA0_CTRL_TYPE (IDE_LOCAL) /* ATA 0 logical type */ 
#define ATA0_NUM_DRIVES (1) /* ATA 0 number drives present */ 
#define ATA0_INT_LVL (0x0e) /* ATA 0 interrupt level */ 

#define ATA0_CONFIG (ATA_GEO_CURRENT | ATA_PIO_AUTO | \\ 
                            ATA_BITS_16 | ATA_PIO_MULTI) 

#define ATA0_SEM_TIMEOUT (5) /* ATA 0 sync. semaphore timeout */ 
#define ATA0_WDG_TIMEOUT (5) /* ATA 0 watchdog timer timeout */ 
#define ATA0_SOCKET_TWIN (0) /* Socket number (TWIN PCMCIA Card) */ 
#define ATA0_POWER_DOWN (0) /* ATA power down mode */ 

/* ATA controller one ataResources[] parameters */ 

#define ATA1_VCC (5) /* ATA 1 Vcc (3 or 5 volts) */ 
#define ATA1_VPP (0) /* ATA 1 Vpp (5 or 12 volts or 0) */ 
#define ATA1_IO_START0 (0x170) /* Start I/O Address 0 for ATA 1 */ 
#define ATA1_IO_START1 (0x376) /* Start I/O Address 1 for ATA 1 */ 
#define ATA1_IO_STOP0 (0x177) /* Stop I/O Address 0 for ATA 1 */ 
#define ATA1_IO_STOP1 (0x377) /* Stop I/O Address 1 for ATA 1 */ 
#define ATA1_EXTRA_WAITS (0) /* ATA 1 extra wait states (0-2) */ 
#define ATA1_MEM_START (0) /* ATA 1 memory start address */ 
#define ATA1_MEM_STOP (0) /* ATA 1 memory start address */ 
#define ATA1_MEM_WAITS (0) /* ATA 1 memory extra wait states */ 
#define ATA1_MEM_OFFSET (0) /* ATA 1 memory offset */ 
#define ATA1_MEM_LENGTH (0) /* ATA 1 memory offset */ 
#define ATA1_CTRL_TYPE (ATA_PCMCIA) /* ATA 1 logical type */ 
#define ATA1_NUM_DRIVES (1) /* ATA 1 number drives present */ 
#define ATA1_INT_LVL (0x09) /* ATA 1 interrupt level */ 

#define ATA1_CONFIG (ATA_GEO_CURRENT | ATA_PIO_AUTO | \\ 
                            ATA_BITS_16 | ATA_PIO_MULTI) 

#define ATA1_SEM_TIMEOUT (5) /* ATA 1 sync. semaphore timeout */ 
#define ATA1_WDG_TIMEOUT (5) /* ATA 1 watchdog timer timeout */ 
#define ATA1_SOCKET_TWIN (0) /* Socket number (TWIN PCMCIA Card) */ 
#define ATA1_POWER_DOWN (0) /* ATA 1 power down mode */ 


/* console definitions */ 

#undef NUM_TTY 
#define NUM_TTY (N_UART_CHANNELS) /* number of tty channels */ 

#define INCLUDE_PC_CONSOLE /* PC keyboard and VGA console */ 

#ifdef INCLUDE_PC_CONSOLE 
# define PC_CONSOLE (0) /* console number */ 
# define N_VIRTUAL_CONSOLES (2) /* shell / application */ 
#endif /* INCLUDE_PC_CONSOLE */ 

/* PS/2 101-key default keyboard type (use PC_XT_83_KBD for 83-key) */ 

#define PC_KBD_TYPE (PC_PS2_101_KBD) 


/* memory addresses, offsets, and size constants */ 

#if (SYS_WARM_TYPE == SYS_WARM_BIOS) /* non-volatile RAM size */ 
# define NV_RAM_SIZE (NONE) 
#else 
# define NV_RAM_SIZE (0x1000) 
#endif 

#define USER_RESERVED_MEM (0) /* user reserved memory */ 
#define LOCAL_MEM_LOCAL_ADRS (0x00100000) /* on-board memory base */ 

/* 
 * LOCAL_MEM_SIZE is the offset from the start of on-board memory to the 
 * top of memory. If the page size is 2MB or 4MB, write-protected pages 
 * for the MMU directory tables and  array are also a 
 * multiple of 2MB or 4MB. Thus, LOCAL_MEM_SIZE should be big enough to 
 * hold them. 
 */ 

#if (VM_PAGE_SIZE == PAGE_SIZE_4KB) /* 4KB page */ 
# define SYSTEM_RAM_SIZE (0x00800000) /* minimum 8MB system RAM */ 
#else /* PAGE_SIZE_[2/4]MB */ /* [2/4]MB page */ 
# define SYSTEM_RAM_SIZE (0x02000000) /* minimum 32MB system RAM */ 
#endif /* (VM_PAGE_SIZE == PAGE_SIZE_4KB) */ 

#define LOCAL_MEM_SIZE (SYSTEM_RAM_SIZE - LOCAL_MEM_LOCAL_ADRS) 


/* 
 * Memory auto-sizing is supported when this option is defined. 
 * See sysyPhysMemTop() in the BSP sysLib.c file. 
 */ 

#ifdef INCLUDE_MMU_P6_36BIT 
# undef LOCAL_MEM_AUTOSIZE 
#else 
# define LOCAL_MEM_AUTOSIZE 
#endif /* INCLUDE_MMU_P6_36BIT */ 

/* 
 * The following parameters are defined here and in the BSP Makefile. 
 * They must be kept synchronized. Any changes made here must be made 
 * in the Makefile and vice versa. 
 */ 

#ifdef BOOTCODE_IN_RAM 
# undef ROMSTART_BOOT_CLEAR 
# define ROM_BASE_ADRS (0x00008000) /* base address of ROM */ 
# define ROM_TEXT_ADRS (ROM_BASE_ADRS) /* booting from A: or C: */ 
# define ROM_SIZE (0x00090000) /* size of ROM */ 
#else 
# define ROM_BASE_ADRS (0xfff20000) /* base address of ROM */ 
# define ROM_TEXT_ADRS (ROM_BASE_ADRS) /* booting from EPROM */ 
# define ROM_SIZE (0x0007fe00) /* size of ROM */ 
#endif 

#define RAM_LOW_ADRS (0x00308000) /* VxWorks image entry point */ 
#define RAM_HIGH_ADRS (0x00108000) /* Boot image entry point */ 

/* 
 * The INCLUDE_ADD_BOOTMEM configuration option enables runtime code which 
 * will add a specified amount of upper memory (memory above physical address 
 * 0x100000) to the memory pool of an image in lower memory. This option 
 * cannot be used on systems with less than 4MB of memory. 
 * 
 * The default value for ADDED_BOOTMEM_SIZE, the amount of memory to add 
 * to a lower memory image's memory pool, is 2MB. This value may be increased, 
 * but one must ensure that the pool does not overlap with the downloaded 
 * vxWorks image. If there is an overlap, then loading the vxWorks runtime 
 * image will corrupt the added memory pool. The calculation for determining 
 * the ADDED_BOOTMEM_SIZE value is: 
 * 
 * (RAM_LOW_ADRS + vxWorks image size) < (memTopPhys - ADDED_BOOTMEM_SIZE) 
 * 
 * Where  is calculated in the BSP sysLib.c file. This 
 * configuration option corrects SPR 21338. 
 */ 

#define INCLUDE_ADD_BOOTMEM /* Add upper memory to low memory bootrom */ 
#define ADDED_BOOTMEM_SIZE (0x00200000) /* 2MB additional memory */ 

/* power management definitions */ 

#define VX_POWER_MANAGEMENT /* define to enable */ 
#define VX_POWER_MODE_DEFAULT VX_POWER_MODE_AUTOHALT /* set mode */ 

/* AMP (asymmetric multi processor) definitions */ 

#ifdef TGT_CPU 
# include "configAmp.h" 
#endif /* TGT_CPU */ 

/* interrupt mode/number definitions */ 

#include "configInum.h" 

#ifdef INCLUDE_IACSFL 
# include "iacsfl.h" 
#endif /* INCLUDE_IACSFL - iacsfl.h overrides some macros in config.h */ 

/* 
 * defining _WRS_BSP_DEBUG_NULL_ACCESS will disable access to lower  
 * page in MMU, see sysPhysMemDesc [] and sysPhysMemTop() in sysLib.c  
 * for more details. This causes the CPU to generate an exception for  
 * any NULL pointer access, or any access to lower page of memory.  
 * VxWorks will suspend the task which made the access. 
 * Note that the MMU must be enabled for this to work. 
 */ 

#define _WRS_BSP_VM_PAGE_OFFSET (VM_PAGE_SIZE) 

#undef _WRS_BSP_DEBUG_NULL_ACCESS 

#ifdef _WRS_BSP_DEBUG_NULL_ACCESS /* protect NULL access with MMU */ 

# if (VM_PAGE_SIZE != PAGE_SIZE_4KB) /* works when page size is 4KB */ 
# error PAGE_SIZE_4KB required to use _WRS_BSP_DEBUG_NULL_ACCESS 
# endif /* (VM_PAGE_SIZE == PAGE_SIZE_4KB) */ 

# if (LOCAL_MEM_LOCAL_ADRS == 0x0) 
# undef VEC_BASE_ADRS 
# define VEC_BASE_ADRS ((char *) (_WRS_BSP_VM_PAGE_OFFSET * 2)) 

# undef GDT_BASE_OFFSET 
# define GDT_BASE_OFFSET (0x0800 + (_WRS_BSP_VM_PAGE_OFFSET * 2)) 

# undef SM_ANCHOR_OFFSET 
# define SM_ANCHOR_OFFSET (0x1100 + (_WRS_BSP_VM_PAGE_OFFSET * 2)) 

# undef EXC_MSG_OFFSET 
# define EXC_MSG_OFFSET (0x1300 + (_WRS_BSP_VM_PAGE_OFFSET * 2)) 

# undef FD_DMA_BUF_ADDR 
# define FD_DMA_BUF_ADDR (0x2000 + (_WRS_BSP_VM_PAGE_OFFSET * 2)) 

# undef FD_DMA_BUF_SIZE 
# define FD_DMA_BUF_SIZE (0x1000) 

# undef BOOT_LINE_ADRS 
# define BOOT_LINE_ADRS ((char *) (0x1200)) 
# endif /* (LOCAL_MEM_LOCAL_ADRS == 0x0) */ 

#endif /* _WRS_BSP_DEBUG_NULL_ACCESS */ 

#ifdef __cplusplus 
} 
#endif 

#endif /* INCconfigh */ 

#if defined(PRJ_BUILD) 
# include "prjParams.h" 
#endif

      其中h=192.168.102.1 是虛擬機網卡IP，e=192.168.102.88是telnet時用到的IP，也就是vxworks的IP。

      配置target servers：

      圖片

      下載到visualbox的vxworks鏡像文件，注意，路徑包含文件名。

      圖片

      file：C:\\Tornado2.2\\target\\proj\\Project10\\default\\vxWorks

      FTP服務器配置：

      圖片

      在win7機器上用ramdisknt15創建了一個虛擬的軟驅A：

      創建一個批處理文件，運行后自動把bootrom寫到軟驅里

      @echo on
@c:
@cd c:\\Tornado2.2\\host\\x86-win32\\bin&torvars.bat&cd c:\\Tornado2.2\\target\\config\\pcPentium&mkboot a: bootrom

      visualbox的網絡設置

      圖片

      虛擬機啟動設置設為從物理軟盤A:啟動。（在vmware里好像不能從物理軟驅啟動）

      圖片

      聲明：本文內容及配圖由入駐作者撰寫或者入駐合作網站授權轉載。文章觀點僅代表作者本人，不代表電子發燒友網立場。文章及其配圖僅供工程師學習之用，如有內容侵權或者其他違規問題，請聯系本站處理。 舉報投訴
      • VxWorks
        +關注

        關注

        3

        文章

        351

        瀏覽量

        97301
      • 虛擬機
        +關注

        關注

        1

        文章

        949

        瀏覽量

        28471
      • Shell
        +關注

        關注

        1

        文章

        366

        瀏覽量

        23476
      • ftp服務器
        +關注

        關注

        0

        文章

        15

        瀏覽量

        9516
      收藏 人收藏

        評論

        相關推薦

        如何在KVM上使用CCA RME虛擬機？

        之前介紹了CCA設計的一個目的是讓hypervisor可以創建和調度RME虛擬機和vCPU，并且給它分配內存等資源，但是一旦這些資源分配給RME虛擬機之后，hypervisor就失去了訪問這些RME所有的內存內容的權限。
        的頭像 發表于 09-11 14:59 ?1856次閱讀
        如<b class='flag-5'>何在</b>KVM<b class='flag-5'>上</b>使用CCA RME<b class='flag-5'>虛擬機</b>？

        什么是虛擬機？虛擬機真的那么好用嗎？

        在日新月異的科技世界中，虛擬化技術如同一座橋梁，連接著現實與數字的鴻溝，為我們打開了全新的計算維度。虛擬機，這一概念，自其誕生以來，就以其獨特的魅力和強大的功能，深深地影響了軟件開發、系統測試和云
        的頭像 發表于 07-06 08:05 ?463次閱讀
        什么是<b class='flag-5'>虛擬機</b>？<b class='flag-5'>虛擬機</b>真的那么好用嗎？

        虛擬機安裝的Web Pack許可證無法將Lcence權限加載到可信存儲中

        請您理解有關虛擬機許可證的位置。我有一個運行Web pack（xml）許可證的Vivado 15.2的Windows 7安裝。我在Virtual Box上安裝了Linux，需要使用相同
        發表于 12-17 11:44

        請問環境搭建的時候，虛擬機可以使用virtual box么？

        請問環境搭建的時候，虛擬機可以使用virtual box么？萌新求指導
        發表于 01-06 07:01

        Java虛擬機介紹

        什么是JVM？Java虛擬機（Java Virtual Machine, JVM）實際上是一個類似于真實計算機系統的抽象機（Abstract Computing Machine），它擁
        發表于 04-10 16:15 ?0次下載

        微軟java虛擬機下載

        微軟java虛擬機下載:Java虛擬機（JVM）是Java Virtual Machine的縮寫，它是一個虛構出來的計算機,是通過在實際的計算機上仿真模擬各種計算機功能模擬來實現的。Java虛
        發表于 02-26 08:26 ?38次下載

        什么是虛擬機

        簡單地說，虛擬機（Virtual Machine）就是允許我們在當前操作系統中運行其他操作系統的軟件，本質上和 VS、QQ 這些應用程序一樣。
        發表于 07-15 16:14 ?1670次閱讀
        什么是<b class='flag-5'>虛擬機</b>

        虛擬機是什么，具體是做什么的呢？

        虛擬機簡單來講就是一款虛擬的機器，并不是真實存在的物體，在已經安裝過系統的電腦或者其他設備上，可以通過一些軟件模擬出一款虛擬機，然后就可以在虛擬機
        的頭像 發表于 10-23 17:23 ?1.6w次閱讀

        KVM虛擬機管理和基本使用

        KVM — 全稱是基于內核的虛擬機（Kernel-based Virtual Machine）是一個開源軟件，基于內核的虛擬化技術，實際是嵌入系統的一個虛擬化模塊，通過優化內核來使用
        的頭像 發表于 02-07 09:20 ?1363次閱讀

        虛擬機linux怎么編寫程序

        在虛擬機Linux上編寫程序是一項非常常見且有用的任務。無論是開發一個簡單的腳本、一個Web應用程序還是一個復雜的軟件項目，Linux提供了強大的工具和環境來幫助你進行編程。本文將詳細介紹如何在
        的頭像 發表于 11-17 10:08 ?1916次閱讀

        虛擬機如何運行c程序

        虛擬機（Virtual Machine，VM）是一種模擬了物理計算機的軟件，可以在計算機上創建虛擬的硬件平臺，使得用戶可以在其中運行操作系統和應用程序。在虛擬機中運行C程序需要進行多個
        的頭像 發表于 11-17 10:14 ?5012次閱讀

        如何在虛擬機上運行c源代碼

        如何在虛擬機上運行C源代碼 確保虛擬機環境設置正確 在使用虛擬機之前，首先需要確保虛擬機已正確安裝并正確設置。在選擇
        的頭像 發表于 11-17 10:16 ?4623次閱讀

        怎么安裝linux虛擬機

        在計算機領域，虛擬機是一種軟件程序，它允許在主操作系統上運行多個虛擬操作系統。Linux虛擬機在開發、測試和學習等環境中得到廣泛應用。本文將詳細介紹如何安裝Linux
        的頭像 發表于 11-23 10:50 ?1165次閱讀

        虛擬機ubuntu怎么聯網

        虛擬機ubuntu怎么聯網? 虛擬機（Virtual Machine）是運行在物理機（Host Machine）上的
        的頭像 發表于 12-27 16:51 ?1044次閱讀

        Ubuntu系統的虛擬機安裝步驟 如何在Ubuntu系統上編譯軟件

        Ubuntu系統上安裝虛擬機的步驟 在Ubuntu系統上安裝虛擬機是一個相對簡單的過程，通常可以通過安裝VirtualBox或KVM等虛擬化
        的頭像 發表于 12-12 14:36 ?530次閱讀
        主站蜘蛛池模板： 日本久本草精品 | 亚洲aaa视频 | 96福利视频 | 天堂资源在线最新版 | 天天操天天干天天操 | 香蕉视频网站在线播放 | 亚洲第二色 | 欧美色淫网站免费观看 | 精品一区二区三区免费爱 | 国产黄色三级三级三级 | 狠狠色噜狠狠狠狠色综合久 | 久久精品视频观看 | 国产免费卡1卡2卡 | www.天天射 | 午夜看黄 | 欧美成人高清性色生活 | 狠狠色丁香婷婷综合橹不卡 | 91黄视频在线观看 | 午夜精品久久久久久久久 | 一级免费看 | 亚洲香蕉毛片久久网站老妇人 | 国产精品久久久久久久久久影院 | 伊人网大香| αv天堂 | 五月婷婷六月激情 | 天天做天天爱夜夜爽女人爽宅 | 国产一区二区中文字幕 | 特级aaa毛片 | 色在线视频免费 | 免费观看黄a一级视频 | 久久综合色综合 | 日本最黄 | 69久久| 狠狠色噜噜狠狠狠狠98 | 5566成人免费视频观看 | 亚洲大成色www永久网 | 久久综合九色综合98一99久久99久 | 午夜免费观看福利片一区二区三区 | 日本人xxxxxxxxxⅹ69 | 波多野结衣在线一区 | 五月激情婷婷丁香 |