在线观看www成人影院-在线观看www日本免费网站-在线观看www视频-在线观看操-欧美18在线-欧美1级

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
創作
電子發燒友網>電子資料下載>類型>參考設計>EVAL-CN0338-ARDZ屏蔽

EVAL-CN0338-ARDZ屏蔽

2021-04-09 | pdf | 730.43KB | 次下載 | 3積分

資料介紹

This version (03 Jan 2021 21:51) was approved by Robin Getz.The Previously approved version (09 Feb 2016 20:45) is available.Diff

EVAL-CN0338-ARDZ Shield

The EVAL-CN0338-ARDZ shield is a Non-Dispersive Infrared(NDIR) carbon dioxide detector reference design. Complete with thermopile sensor, lamp, and light tube, this design interfaces directly with the dual 24-bit sigma delta converters on the EVAL-ADICUP360.

The EVAL-CN0338-ARDZ shield is optimized for CO2 sensing, but can accurately measure the concentration of a large number of gases by using thermopiles with different optical filters.

EVAL-CN0338-ARDZ shield uses NDIR(Non-Dispersive Infrared) physical sensing technique, it does not chemically react with the target gas or give off any toxic by products when measuring the gas concentration. Stable after long period of storage. With two calibrate method (standard beer-lambert calibration and modified beer-lambert calibration) the measurement range can up to 0% ~ 100%. With the temperature composition algorithm in firmware, the CN0338 eliminated temperature drift from idea gas law.

Connectors and configuration

The CN0338 firmware use P0.1 and P0.2 port of ADuCM360 as UART communicate port, for detailed description about how to connect P0.1 and P0.2 UART port to USER USB or DEBUG UBS, please reference EVAL-ADICUP360 Base Board Hardware

CN0338 Shield Board

The following is the CN0338 shield board picture (not to scale):

  • The lamp is connected through the DS1 connector and is powered by the external wall power supply provided on the EVAL-ADICUP360.
  • The light tube is made of PVC piping and is located in the large rectangular blocked off section of the EVAL-CN0338-ARDZ, and secured to the board using tie wraps.
  • J1, J2, J3, and J4 provide electrical and mechanical connector mounts to the SENSOR board. Please see the section below which describes the sensor board in more detail.

CN0338 Sensor Board

The following is the CN0338 sensor board picture (not to scale):

  • The sensor board should be mount to the shield board vertically, please plug the sensor board contact wing (lower part of sensor board without solder mask) to slot (at right part of board between J1 and J4) of shield board. Please make sure header J1,J2,J3,J4 at shield board plug into receptacles J4,J3,J2,J1 at sensor board firmly.
  • The thermopile sensor is located at the reference designator T1, which is at the opposite end of the light tube from where the lamp plugs in.
  • The sensor output goes directly from the EVAL-CN0338-ARDZ to the on board 24-bit sigma deltas of the EVAL-ADICUP360, where the signals are converted and process into the CO2 concentrations.

Schematics, PCB Layout, Bill of Materials

CN0338 Design and Integration Files

  • Schematics
  • Layout Files
  • Gerber Files
  • Assembly Drawing

Software examples

Navigation - EVAL-ADICUP360
下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1AN-1267: 使用ADSP-CM408F ADC控制器的電機控制反饋采樣時序
  2. 1.41MB   |  3次下載  |  免費
  3. 2AN158 GD32VW553 Wi-Fi開發指南
  4. 1.51MB   |  2次下載  |  免費
  5. 3AN148 GD32VW553射頻硬件開發指南
  6. 2.07MB   |  1次下載  |  免費
  7. 4AN-1154: 采用恒定負滲漏電流優化ADF4157和ADF4158 PLL的相位噪聲和雜散性能
  8. 199.28KB   |  次下載  |  免費
  9. 5AN-960: RS-485/RS-422電路實施指南
  10. 380.8KB   |  次下載  |  免費
  11. 6EE-249:使用VisualDSP在ADSP-218x DSP上實現軟件疊加
  12. 60.02KB   |  次下載  |  免費
  13. 7AN-1111: 使用ADuCM360/ADuCM361時的降低功耗選項
  14. 306.09KB   |  次下載  |  免費
  15. 8AN-904: ADuC7028評估板參考指南
  16. 815.82KB   |  次下載  |  免費

本月

  1. 1ADI高性能電源管理解決方案
  2. 2.43 MB   |  450次下載  |  免費
  3. 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
  4. 5.67 MB   |  138次下載  |  1 積分
  5. 3基于STM32單片機智能手環心率計步器體溫顯示設計
  6. 0.10 MB   |  130次下載  |  免費
  7. 4使用單片機實現七人表決器的程序和仿真資料免費下載
  8. 2.96 MB   |  44次下載  |  免費
  9. 5美的電磁爐維修手冊大全
  10. 1.56 MB   |  24次下載  |  5 積分
  11. 6如何正確測試電源的紋波
  12. 0.36 MB   |  18次下載  |  免費
  13. 7感應筆電路圖
  14. 0.06 MB   |  10次下載  |  免費
  15. 8萬用表UT58A原理圖
  16. 0.09 MB   |  9次下載  |  5 積分

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935121次下載  |  10 積分
  3. 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
  4. 1.48MB  |  420062次下載  |  10 積分
  5. 3Altium DXP2002下載入口
  6. 未知  |  233088次下載  |  10 積分
  7. 4電路仿真軟件multisim 10.0免費下載
  8. 340992  |  191367次下載  |  10 積分
  9. 5十天學會AVR單片機與C語言視頻教程 下載
  10. 158M  |  183335次下載  |  10 積分
  11. 6labview8.5下載
  12. 未知  |  81581次下載  |  10 積分
  13. 7Keil工具M(jìn)DK-Arm免費下載
  14. 0.02 MB  |  73810次下載  |  10 積分
  15. 8LabVIEW 8.6下載
  16. 未知  |  65988次下載  |  10 積分
主站蜘蛛池模板: 美女扒开尿囗给男人玩的动图 | 亚洲国内精品 | 六月婷婷综合网 | 国产真实灌醉美女疯狂弄 | 欧美黄色一级片视频 | 视频一区中文字幕 | 一区二区三区高清视频在线观看 | 女生扒开尿口让男生舔 | www四虎影院 | 日韩美女三级 | 国产小视频在线看 | 亚洲天天做日日做天天欢毛片 | 精品玖玖 | 天天操人人干 | 毛片8 | 国产乱人视频免费播放 | 国产v精品成人免费视频400条 | 人人cao| 亚洲成年网 | 免费观看成年欧美1314www色 | 成年大片免费视频播放手机不卡 | 在线观看视频你懂的 | 日本一区不卡在线观看 | 亚洲免费在线观看视频 | 国产精品视频一区二区三区 | 停停五月天 | 国产成人系列 | 亚洲精品成人a在线观看 | 国产精品午夜免费观看网站 | 午夜丁香影院 | 禁漫羞羞a漫入口 | 亚洲免费不卡 | 中文字幕一二三四区2021 | 色噜噜人体337p人体 | 日日舔夜夜操 | 国产成人精品亚洲 | 欧美大黄| 婷婷资源 | 在线免费看黄 | 9色在线| 美女扒开尿口给男的桶个爽 |