電子發燒友網>電子資料下載>電子資料>PyTorch教程10.6之編碼器-解碼器架構

PyTorch教程10.6之編碼器-解碼器架構

2512975 2023-06-05 | pdf | 0.11 MB | 次下載 | 免費

資料介紹

在一般的 seq2seq 問題中，如機器翻譯（第 10.5 節），輸入和輸出的長度不同且未對齊。處理這類數據的標準方法是設計一個編碼器-解碼器架構（圖 10.6.1），它由兩個主要組件組成：一個 編碼器，它以可變長度序列作為輸入，以及一個 解碼器，作為一個條件語言模型，接收編碼輸入和目標序列的向左上下文，并預測目標序列中的后續標記。

圖 10.6.1編碼器-解碼器架構。

讓我們以從英語到法語的機器翻譯為例。給定一個英文輸入序列：“They”、“are”、“watching”、“.”，這種編碼器-解碼器架構首先將可變長度輸入編碼為一個狀態，然后對該狀態進行解碼以生成翻譯后的序列，token通過標記，作為輸出：“Ils”、“regardent”、“.”。由于編碼器-解碼器架構構成了后續章節中不同 seq2seq 模型的基礎，因此本節將此架構轉換為稍后將實現的接口。

						from torch import nn
from d2l import torch as d2l

						from mxnet.gluon import nn
from d2l import mxnet as d2l

						from flax import linen as nn
from d2l import jax as d2l

						No GPU/TPU found, falling back to CPU. (Set TF_CPP_MIN_LOG_LEVEL=0 and rerun for more info.)

					

						import tensorflow as tf
from d2l import tensorflow as d2l

10.6.1。編碼器

在編碼器接口中，我們只是指定編碼器將可變長度序列作為輸入X。實現將由繼承此基類的任何模型提供Encoder。

							class Encoder(nn.Module): #@save
  """The base encoder interface for the encoder-decoder architecture."""
  def __init__(self):
    super().__init__()

  # Later there can be additional arguments (e.g., length excluding padding)
  def forward(self, X, *args):
    raise NotImplementedError

							 

							class Encoder(nn.Block): #@save
  """The base encoder interface for the encoder-decoder architecture."""
  def __init__(self):
    super().__init__()

  # Later there can be additional arguments (e.g., length excluding padding)
  def forward(self, X, *args):
    raise NotImplementedError

							 

							class Encoder(nn.Module): #@save
  """The base encoder interface for the encoder-decoder architecture."""
  def setup(self):
    raise NotImplementedError

  # Later there can be additional arguments (e.g., length excluding padding)
  def __call__(self, X, *args):
    raise NotImplementedError

							 

							class Encoder(tf.keras.layers.Layer): #@save
  """The base encoder interface for the encoder-decoder architecture."""
  def __init__(self):
    super().__init__()

  # Later there can be additional arguments (e.g., length excluding padding)
  def call(self, X, *args):
    raise NotImplementedError

							 

10.6.2。解碼器

在下面的解碼器接口中，我們添加了一個額外的init_state 方法來將編碼器輸出 ( enc_all_outputs) 轉換為編碼狀態。請注意，此步驟可能需要額外的輸入，例如輸入的有效長度，這在第 10.5 節中有解釋。為了逐個令牌生成可變長度序列令牌，每次解碼器都可以將輸入（例如，在先前時間步生成的令牌）和編碼狀態映射到當前時間步的輸出令牌。

							class Decoder(nn.Module): #@save
  """The base decoder interface for the encoder-decoder architecture."""
  def __init__(self):
    super().__init__()

  # Later there can be additional arguments (e.g., length excluding padding)
  def init_state(self, enc_all_outputs, *args):
    raise NotImplementedError

  def forward(self, X, state):
    raise NotImplementedError

							 

							class Decoder(nn.Block): #@save
  """The base decoder interface for the encoder-decoder architecture."""
  def __init__(self):
    super().__init__()

  # Later there can be additional arguments (e.g., length excluding padding)
  def init_state(self, enc_all_outputs, *args):
    raise NotImplementedError

  def forward(self, X, state):
    raise NotImplementedError

							 

							class Decoder(nn.Module): #@save
  """The base decoder interface for the encoder-decoder architecture."""
  def setup(self):
    raise NotImplementedError

  # Later there can be additional arguments (e.g., length excluding padding)
  def init_state(self, enc_all_outputs, *args):
    raise NotImplementedError

  def __call__(self, X, state):
    raise NotImplementedError

							 

							class Decoder(tf.keras.layers.Layer): #@save
  """The base decoder interface for the encoder-decoder architecture."""
  def __init__(self):
    super().__init__()

  # Later there can be additional arguments (e.g., length excluding padding)
  def init_state(self, enc_all_outputs, *args):
    raise NotImplementedError

  def call(self, X, state):
    raise NotImplementedError

							 

10.6.3。將編碼器和解碼器放在一起

在前向傳播中，編碼器的輸出用于產生編碼狀態，解碼器將進一步使用該狀態作為其輸入之一。

							class EncoderDecoder(d2l.Classifier): #@save
  """The base class for the encoder-decoder architecture."""
  def __init__(self, encoder, decoder):
    super().__init__()
    self.encoder = encoder
    self.decoder = decoder

  def forward(self, enc_X, dec_X, *args):
    enc_all_outputs = self.encoder(enc_X, *args)
    dec_state = self.decoder.init_state(enc_all_outputs, *args)
    # Return decoder output only
    return self.decoder(dec_X, dec_state)[0]

							 

							class EncoderDecoder(d2l.Classifier): #@save
  """The base class for the encoder-decoder architecture."""
  def __init__(self, encoder, decoder):
    super().__init__()
    self.encoder = encoder
    self.decoder = decoder

  def forward(self, enc_X, dec_X, *args):
    enc_all_outputs = self.encoder(enc_X, *args)
    dec_state = self.decoder.init_state(enc_all_outputs, *args)
    # Return decoder output only
    return self.decoder(dec_X, dec_state)[0]

							 

							class EncoderDecoder(d2l.Classifier): #@save
  """The base class for the encoder-decoder architecture."""
  encoder: nn.Module
  decoder: nn.Module
  training: bool

  def __call__(self, enc_X, dec_X, *args):
    enc_all_outputs = self.encoder(enc_X, *args, training=self.training)
    dec_state = self.decoder.init_state(enc_all_outputs, *args)
    # Return decoder output only
    return self.decoder(dec_X, dec_state, training=self.training)[0]

							 

							class EncoderDecoder(d2l.Classifier): #@save
  """The base class for the encoder-decoder architecture."""
  def __init__(self, encoder, decoder):
    super().__init__()
    self.encoder = encoder
    self.decoder = decoder

  def call(self, enc_X, dec_X, *args):
    enc_all_outputs = self.encoder(enc_X, *args, training=True)
    dec_state = self.decoder.init_state(enc_all_outputs, *args)
    # Return decoder output only
    return self.decoder(dec_X, dec_state, training=True)[0]

							 